Wireless Inspection snake Camera and 3.5 LCD monitor video recorder

Description The product is designed as a remote inspection device. It can be used to look into tight spots and beam back real-time video to monitor and record video / take pictures. Typical applications might include HVAC inspection, automotive inspection, cable routing, automotive / boat / aircraft inspection, etc. Specification:
Features:
3.5" TFT-LCD palm LCD monitor with resolution of 960*240;
Supporting many kinds of languages menus and featuring simple operation;
The image head and the cable are water resistant when the unit is fully assembled, but the monitor and camera is not;
Wired and Wireless function Compatible;
The monitor could record video and take pictures;
the SD card capacity up to 16G.
Camera specifications
Mode No.: LM-GB8802
Imaging Sensor: CMOS
Total Pixels: 704X576 ( PAL ) ; 712X486 ( NTSC )
Horizontal View Angle: 50 degree
Transmission Frequency: 2468MHz
Minimum Illumination: 0 Lux
Modulation Type: FM
Bandwidth: 18MHz
Power Supply: 4 X AA batteraies
Unobstructed Efective Range: 10m
Waterproof Capacity: IP67 ( only for imager head )
Dimensions ( W * D * H ): 186 * 145 * 41 ( mm ) ( Exclude Flexible Tube )
Weight ( about ): 530g
Monitor specifications
Mode No. : GB7307
LCD Screen Type: 3.5" TFT-LCD
Effective Pixels: 320 ( R.G.B. ) X 240
Video System: PAL / NTSC
Transmission Frequency: 2414MHz, 2432MHz, 2450MHz, 2468MHz
Exterior Supply Voltage: 5Vdc
Consumption Current ( Max. ): 500mA
Charge Time: 3 hours
Work Time: 2 hours
Picture / Video Pixels : 640X480
Video Size: 27M byte / minute
Frame Rate: 30 frame / second
Video Output Level: 0.9-1.3Vp-p@75ohm
Receiving Sensitivity: <=-85dBm
Dimensions ( W X D X H ): 100X70X25( mm )
Weight ( About ): 140g